Cart

Boxes and Dongles Z3X Easy-Jtag Plus
  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Z3X Easy-Jtag Plus - Hardware features:

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus - Hardware benefits:

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10
  • Full support for Windows XP

eMMC Socket - Features:

  • Made from high quality materials
  • Over 10K cycles of lifetime performance
  • Support for a wide range of eMMC ICs
  • High-speed up to 40 MB/sec through 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic (no need for additional power source)
  • Surge protection - smart fuse driven (0.5A threshold)

Z3X Easy-Jtag Plus Full Set - Package Content:

  • Easy-JTAG Plus Box Hardware
  • Z3X preactivated card with EasyJTAG PLUS Activation
  • Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
  • USB A-B cable

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions.

4 stars, based on 1 USD206.1 USD206.1

Z3X Easy-Jtag Plus

  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Z3X Easy-Jtag Plus - Hardware features:

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus - Hardware benefits:

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10
  • Full support for Windows XP

eMMC Socket - Features:

  • Made from high quality materials
  • Over 10K cycles of lifetime performance
  • Support for a wide range of eMMC ICs
  • High-speed up to 40 MB/sec through 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic (no need for additional power source)
  • Surge protection - smart fuse driven (0.5A threshold)

Z3X Easy-Jtag Plus Full Set - Package Content:

  • Easy-JTAG Plus Box Hardware
  • Z3X preactivated card with EasyJTAG PLUS Activation
  • Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
  • USB A-B cable

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions.


Weight: .25 Kg
Calculate Shipping Cost
Bookmark and Share
USD 206.1 $

Products Information